Flame-retardant rubber and plastic insulation pipe installation technical principles

April 22, 2022

Technical principles for installation of flame retardant rubber and plastic insulation pipes After the 1970s, rubber and plastic insulation pipes have been used. The production of flame retardant rubber and plastic insulation pipes and their application in construction have become more and more obvious. A lot of rubber and plastic insulation pipe models and rubber and plastic insulation pipe brands, such as b2 rubber and plastic insulation pipe, rubber and plastic air conditioning insulation pipe.

The rubber-plastic insulation pipe made by Meike Rubber & Plastic Products Co., Ltd. has some technical principles to be observed during installation, so that the flame-retardant rubber-plastic insulation pipe installed can achieve its effect.

The technical principles for the installation of flame retardant rubber and plastic insulation pipes are:

B2 rubber and plastic insulation pipe installation should pay attention to the following points:

1. When installing rubber and plastic insulation cotton pipe, all the cutting gaps and joints should be sealed with special glue.

2. Do not stick them too hard when using glue. Do not use any force at all the interfaces. Gently squeeze them to bond them together.

3, there is a certain order of installation, generally using the first small tube after the small tube, then the order of elbows, straight tubes, valves, etc.

4. When installing the chilled water pipe, etc., the gap between the two ends of the flame-retardant rubber-plastic insulation pipe and the iron pipe should be bonded together, and the thickness of the glue should be paid attention to. The same thickness.

5, for the rubber and plastic insulation pipe pipe cutting gap Zui is good to install to the inconspicuous place, to prevent the impact of beauty, and the gap between the two ends to be staggered.

6. It is not allowed to be installed during the use of the machine, and it is not allowed to be used within 36 hours after installation to prevent sudden occurrence.

These are the installation technical principles that our company's flame retardant rubber and plastic insulation pipe should follow during installation. If you still have any questions, please contact us!

문의하기

Author:

Ms. nancy

이메일:

nancy@casac.cc

Phone/WhatsApp:

+8618704454196