Equipment Description : The edible oil filling machine http://Chinese and English display control system, stainless steel box, just set the required parameters (filling bag length, etc.) in the displayable setting unit, the control system is automatically optimized Match each action to achieve the best packaging speed. The computer detection system is stable and reliable, ensuring the integrity of the packaging bag. Intelligent temperature controller control. Automatically complete all work such as metering, bag making, filling, sealing, cutting and counting. Three-side sealing double-sided heating or four-side sealing heat sealing mode.
Scope of application : The small edible oil filling machine is suitable for automatic packaging of sauce materials and liquid materials in food and pharmaceutical products, such as: peanut oil, soybean oil, salad oil and other edible oils, creams, sauces, jams, etc. Tomato sauce, honey and other materials.
Equipment features :
Sealing form: can be customized into a three-side seal, four-side seal, pillow-shaped back pocket.
Packaging materials: paper / polyethylene polyester / aluminum foil / polyethylene nylon / polyethylene tea filter paper.
Optional equipment: coder (ribbon type, ink wheel type); computer control device.
Technical parameters of the equipment:
Packing capacity: 40-60 bags/minute Measurement range: 1.0-50mm
Bag size: length 60-180mm, width 50-120mm
Power supply voltage: 380V three-phase four-wire system
Power consumption: 1620 (heating 180×4)W
Dimensions: width 650 × depth 750 × height 1588mm
Net weight: 170kg
Equipment maintenance and maintenance:
1. When the equipment is out of service, flush the residue in the pipeline with clean water in time. Otherwise, the quality of the next shift will be affected when the residual fluid deteriorates.
2. Regularly check the moving parts and lubrication conditions in each shift, and add 30# lubricating oil or lithium grease at any time. Otherwise it will not work properly and will seriously affect the service life of the machine.
3. Regularly check each class to remove the foreign matter on the cleanly-sealed end face. No scaling is allowed. Otherwise, the heat conductivity may decrease, the temperature of the heating block increases, and the cross-heat sealing and cutting bag is abnormal.
4. When an abnormal situation is found, the power should be cut off immediately and it can be reused after being excluded.
5, winter production, when the temperature is below 0 °C, must use hot water-soluble quantitative pump and icing in the pipeline, otherwise it will cause the connecting rod to break, or the machine can not start.
6. The thickness of the single-plate plastic film used in this machine should be 80 microns, and the tensile strength, thickness uniformity and lubricity of the film should be guaranteed. The weight of each roll should be controlled below (320mm) 18kg. (240mm) 14kg or less, if you do not use the monolithic plastic film recommended by this machine to cause poor heat sealing, or increase the broken bag rate, the user is responsible for their responsibility.
Soft packaging edible oil filling machine http://
Pepper oil filling machine http://
Bag essence cream filling machine http://
Bag peanut oil filling machine http://
Small packaging edible oil filling machine http://
Equipment "Three Guarantees" Service :
1. Package commissioning: After the packing machine is placed in the user's place, the technical staff of our company will send it to the user for free debugging so that the packing machine can be put into use in time.
2. Package maintenance: The warranty period is one year from the date the product is purchased from the company. During this period, in addition to the wearing parts, if the design and raw materials of the company are improper or faulty due to the assembly negligence of our company, our company Will be responsible for free home repair for the user. (excluding human-caused accidents, illegal operations, etc.)
3, package training: In order to allow the majority of users of relevant personnel to further understand the performance of the rapid packaging machine, familiar with the mechanical operating procedures and norms, our company will regularly arrange technical training for the user operating personnel.
