Automatic paste filling machine
Product introduction : The automatic quantitative filling machine adopts piston type structure, --dt21jx carries out 0-50 g quantitative filling of liquid, paste and other materials. It is an ideal liquid and paste filling equipment. The material contact part is made of 316L stainless steel, which meets GMP requirements. Filling volume and filling speed can be manually controlled. The structure is simple and reasonable, manual operation is convenient, and no energy is needed.
Scope of application : The BB cream automatic filling machine is designed for small factories, shop processing customers, and hand pressure filling economical. With filling volume adjustment device knobs and instructions, convenient. It can be used in medicine, daily chemicals, food, pesticides and special industries. It can be used to fill liquids, liquid foods, solder pastes, lubricating oils, shampoos, and other pastes and liquids. It has a paste liquid filling machine function.
Equipment features :
1. The structure of the aircraft is simple and reasonable, manual operation is convenient, and no energy is needed.
2. There is a knob for filling quantity adjustment device to quantitatively discharge the material, and the filling quantity and filling speed can be controlled manually.
3, the material contact parts are made of 316L stainless steel, suitable for use under acid and alkali media, in line with food and medical production hygiene requirements.
4. The capacity of the hopper of this machine is 10 kg, and the user can set the filling capacity as required.
Paste filling machine filling effect 
Manual and semi-automatic operation conversion:
Manual, semi-automatic air-controlled selector switches are mainly set up for commissioning or metering. Whenever the new machine is commissioned, or the product is changed, or the filling volume is changed, or the equipment is cleaned, it is recommended to use the manual file for debugging. When commissioning is completed and the product volume is normal, use semi-automatic work. The manual and semi-automatic can be switched freely without shutdown.
Paste filling machine http://
Shoe polish filling machine http://
Hair Conditioner Paste Filler http://
Automatic paste filling machine http://
Paste quantitative filling machine http://
Edible oil filling machine http://
Packaging machine http://
Technical parameters :
Way of working
Manually
Speed of work
20-30 times/minute (differs from person to person)
Filling range
0-50ml (external knob, adjustable)
Filling mouth diameter
7mmx8mm (inner diameter x outer diameter)
Filling accuracy
±1%
Hopper volume
10 kg
Dimensions
270×270×700mm
Total Weight
10KG
Safe use : This product is only suitable for filling high-concentration fluids and cannot be used for other purposes. To ensure production safety, pay attention to the following matters:
1. The machine is uncharged and the selected gas source is .04-.06Mpa.
2, cut off the gas source before washing and disassembling this machine.
3, wash and wash the machine is not, can not use water to wash the body directly, so as not to damage the signal valve inside the device.
4. When checking the air path of the unit, be sure to completely shut off the air supply.
Equipment maintenance :
1. This machine is a stainless steel case body. Do not use a sharp, hard tool to scrape the outer surface of the machine when cleaning it.
2, can use alcohol to scrub the surface stains.
3. The cylinder has been lubricated at the factory. Do not disassemble the cylinder or add any lubricant.
4, the machine's material cylinder, stainless steel three-way and three-way steering valve can easily washable.
5. The worn seal must be replaced in time.
